Upgrade Your Workshop with Dryback Spray Booth Technology

Dry Back Paint Booth Manufacturer in India

Dry Back Paint Booth & Dry
Spray Booth – Autocoat Engineering

Autocoat Engineering has designed and developed a new series of Dry Back Paint Booths with amazingly low running cost of filter replacement — meeting pollution norms with a specialty 4-level metal baffle system. India’s most experienced Dry Back Paint Booth manufacturer since 1985, based in Thane, Maharashtra.

Page last updated: April 18, 2026

Dry Back Paint Booth – Autocoat Engineering India
Dry Back Paint Booth
Dry Back Spray Booth – Autocoat Engineering
Dry Back Spray Booth
Dry Spray Booth India – Autocoat Engineering
Dry Spray Booth

About Dry Back Paint Booths

The Dry Back Spray Paint Booth is also called a Low Cost Spray Booth since it is cheaper to purchase and operate compared to a Water Type Paint Booth. Autocoat has designed and developed a new series of Dry Back Paint Booths that address a major pain point in Indian industry — the costly replacement of standard coarse filters, which is a big hurdle for management and leads to many competitor booths lying idle or performing poorly.

These booths are especially popular for painting applications with low paint consumption (around 20 litres/shift) as well as in laboratory, R&D and development environments. Autocoat’s Dry Back Spray Booths are designed with cleanable and removable metal baffles which arrest most of the paint overspray — leaving behind clear, less smoky air towards the exhauster.

Autocoat Engineering is the most experienced Dry Paint Booth Manufacturer in India since 35 years — with wide experience in manufacturing Dry Back Paint Booths across different material handling configurations, product sizes and production volumes.

Autocoat New Series – Key Features

Autocoat’s new series of Dry Back Paint Booth design incorporates the following innovations:

Specialty 4-Level FiltrationMulti-stage metal baffle system for thorough overspray capture at every level.
Low Paint Consumption UseSuitable for PU and Air Drying (non-sticky) paints with consumption around 20 ltrs/shift.
Amazingly Low Filter CostSpecialty metal baffle design ensures filter replacement cost is kept amazingly low.
Meets Pollution NormsFully compliant with Particulate Matter pollution norms — no compromise on environment.
No ETP RequiredUsed filters to be handed to ETP agents — no effluent treatment plant needed on-site.
Lower Capital CostCapital cost is lower than a Water Wash Booth — ideal for budget-conscious operations.

Autocoat Metal Baffle vs Competitor Coarse Filter

The most critical difference between Autocoat’s Dry Back Paint Booth and competitors’ designs lies in the filtration method:

✓ Autocoat — Metal Baffle Design

  • Cleanable & removable metal baffles
  • Reused after cleaning — no replacement needed
  • Amazingly low maintenance cost
  • Arrests most paint overspray efficiently
  • Clear, less smoky air to exhauster
  • Consistent performance over long periods
  • Keeps production running without interruption

✗ Competitors — Coarse Filter Design

  • Coarse filters cannot be cleaned and reused
  • Choke in 1–2 weeks at 20 ltrs/shift
  • Must be replaced entirely once choked
  • Heavy, recurring filter replacement cost
  • Choked filters restrict airflow completely
  • Painter discomfort and production loss
  • Many booths lie idle due to high filter cost
Why Autocoat’s Design Wins — The Filter Cost Problem Solved

Costly replacement of filters is a big hurdle in Indian industries. Management does not like costly filter purchases every month — and many competitors’ paint booths lie idle or are forced to operate with poor performance as a result. Autocoat’s specialty cleanable metal baffle design solves this problem permanently, delivering amazingly low running costs for the entire lifetime of the booth.

Compliance & Safety Standards

A correctly designed and installed Autocoat Dry Back Spray Booth fulfils all of the following:

Operator Safety

Adequate exhaust ensures the breathing zone is kept free of solvent fumes and paint overspray at all times during operation.

Fire Safety

Efficient exhaust of flammable solvent vapours eliminates fire risk in and around the spray painting area.

Pollution Norms

The 4-level metal baffle filtration meets CPCB Particulate Matter pollution norms — no ETP required on-site.

Paint Finish Quality

Clean, dust-free air in the painting enclosure ensures a high-quality finish with no overspray contamination on wet surfaces.

Dry Back vs Water Wash – Comparison

Not sure which type fits your operation? See Water Wash Spray Booth →

FeatureAutocoat Dry Back BoothWater Wash Paint Booth
Paint TypeNon-sticky, PU, Air DryAll paint types
Paint ConsumptionLow (up to ~20 ltrs/shift)Low to medium
Filtration System4-Level Metal Baffle (cleanable)Pumpless Water Wash
Filter / Running CostAmazingly LowLow
Filter ReusabilityYes — clean & reuseN/A
Waste DisposalHand used filters to ETP agentsPaint sludge collection tank
No ETP On-SiteYesYes
Capital CostLowerModerate
R&D / Lab UseIdealSuitable
MaintenanceClean baffles — very easyTank cleaning periodically

Standard Model Sizes

[PLACEHOLDER] Fill in verified air volume and filter efficiency figures before publishing.

ModelPainting Area (mm)AirflowAir Volume (m³/min)Filter EfficiencyApplication
WDH
AEL-1500 (Standard)150015002000Cross Draft[PH][PH]Batch
AEL-2000 (Standard)200020002200Cross Draft[PH][PH]Batch
AEL-Custom (Customised)As per requirementSide / Down Draft[PH][PH]Conveyor

Dry Back Paint Booth Projects

A selection of Autocoat Dry Back Paint Booth installations across India:

Lab Paint Booth India – Autocoat Engineering
Lab Paint Booth
Dry Paint Booth India – Autocoat Engineering
Dry Paint Booth
Dry Type Spray Booth – Autocoat Engineering
Dry Type Spray Booth

Dry Back Paint Booth Applications

Autocoat Dry Back Paint Booths are the preferred choice wherever low paint consumption and minimal running cost are priorities:

Laboratory & R&D paint applications
Colour matching & paint sampling
PU & air-drying paint operations
Low paint consumption batch painting
Small component & prototype painting
Quality control & inspection painting
Touch-up & rework paint operations
Industrial & OEM low-volume painting

What Our Customers Say

[PLACEHOLDER — replace with 3 real attributed quotes before publishing]

“[PLACEHOLDER: quote about installation, filter cost savings, or service.]”

[Name, Title, Company]

“[PLACEHOLDER: quote about installation, filter cost savings, or service.]”

[Name, Title, Company]

“[PLACEHOLDER: quote about installation, filter cost savings, or service.]”

[Name, Title, Company]

Why Trust Autocoat

Leadership & Team

[PLACEHOLDER: engineer/founder name and credentials]

Certifications

[PLACEHOLDER: ISO/BIS cert number, or remove if none]

Compliance Standards

Designed to meet Particulate Matter norms per the Central Pollution Control Board and fire provisions of the National Building Code of India.

Track Record

Manufacturing Dry Back Paint Booths since 1985 — 35+ years of in-house design, fabrication and on-site commissioning.

Frequently Asked Questions

What is a Dry Back Paint Booth? +
A Dry Back Paint Booth (also called a Low Cost Spray Booth or Dry Spray Booth) is a spray painting enclosure that uses cleanable metal baffles instead of disposable filters to capture paint overspray. It is suitable for non-sticky paints such as PU and air-drying paints with low paint consumption, and offers amazingly low running costs compared to standard filter-based booths.
What makes Autocoat’s Dry Back Booth different from competitors? +
Autocoat uses a specialty 4-level cleanable and removable metal baffle design. These baffles arrest most paint overspray, can be cleaned by usual methods, and reused — keeping filter replacement cost amazingly low. Competitors use coarse filters that choke in 1–2 weeks at 20 litres/shift, cannot be cleaned, and must be replaced entirely — resulting in heavy recurring costs that cause many booths to lie idle or perform poorly.
Which paints are suitable for a Dry Back Paint Booth? +
Dry Back Paint Booths are suitable for non-sticky overspray paints — specifically Air Drying Paints, Quick Drying Polyurethane (PU) Paints, and similar paints that produce non-sticky particles when sprayed. They are not recommended for sticky or water-wash-only paints. For all paint types including epoxy, alkyd and water-base, a Water Wash Paint Booth is the appropriate choice.
Does a Dry Back Paint Booth require an ETP? +
No. Autocoat’s Dry Back Paint Booth does not require an on-site Effluent Treatment Plant (ETP). The used metal baffle filters are simply handed over to authorised ETP agents for disposal. This makes the Dry Back Booth ideal for facilities that cannot accommodate or afford an ETP system.
What is the price of a Dry Back Paint Booth in India? +
Dry Back Paint Booths have a lower capital cost than Water Wash Paint Booths, and their running cost (filter replacement) is amazingly low thanks to Autocoat’s reusable metal baffle design. Prices vary based on size and configuration. Contact Autocoat Engineering at +91-7738638116 for a free customised quotation complete with an AutoCAD drawing.
Who is the best Dry Back Paint Booth manufacturer in India? +
Autocoat Engineering (India) Pvt Ltd, Thane, Maharashtra — India’s most experienced Dry Back Paint Booth and Dry Spray Booth manufacturer since 1985. With 35+ years of expertise, Autocoat has supplied superior quality Dry Back Paint Booths across different material handling configurations, product sizes and production volumes — serving ISO-certified OEMs and corporate companies across India.