Painting Booth Manufacturer in IndiaPainting Booth & Spray Painting
Booth – Autocoat Engineering
Autocoat Engineering is India’s most experienced Painting Booth manufacturer — AutoCAD engineered and manufactured entirely in-house since 1985. Three booth types: Side Draft, Water Wash (pumpless design) and Dry Back — for all paint types, component sizes and production volumes. Thane, Maharashtra.
Page last updated: April 18, 2026
Painting Booth
Spray Painting Booth
Indian Painting Booth
About Painting Booths
Painting without a Painting Booth creates a bad and unhealthy environment. Autocoat with 35+ years of experience manufactures Spray Painting Booths that are precisely AutoCAD engineered and manufactured in-house — fulfilling operator safety, fire safety, pollution norms and improvement in quality of paint finish.
Autocoat Painting Booths reduce dust problems, reduce overspray problems, remove waste spray paint and solve paint sludge disposal — adding value to the final product. Since painting is the last operation prior to packing, a clean paint booth delivers a better finish and higher customer satisfaction.
Autocoat Engineering is one of the most renowned Indian Painting Booth Manufacturers and Suppliers, with many satisfied corporate and ISO-certified customers across the country.
Why Use a Painting Booth?
A Painting Booth addresses four critical needs in every painting operation:
🧑🔧
Operator Safety
Adequate exhaust velocity keeps the breathing zone free from solvent and overspray — per Factories Act 1948 and IS 3457 — allowing operators to work longer and increasing overall productivity.
🔥
Fire Safety
Efficient exhaust eliminates solvent fume accumulation, significantly reducing fire risk — per NBC fire-safety provisions — and creating a safer environment for all personnel.
🌿
Pollution Norms
Water wash and baffle filtration capture paint particles from exhausted air — ensuring full compliance with CPCB environmental pollution standards.
✨
Improved Paint Finish
Overspray is drawn away from freshly painted surfaces, eliminating a common cause of marred finish and delivering consistently higher customer satisfaction with the final product.
Types of Painting Booths
Autocoat manufactures three main configurations — each engineered for specific paint types, component sizes and production volumes. Click any card to see the full dedicated page:
Side Draft Painting Booth
Small to heavy componentsIdeal for small or heavy components where painting is done standing in one position. Specially developed with Monorail & Hoist for heavy components at 10–100 nos./shift.
- ✓Pumps, Electric Motors & Valves
- ✓Engines & Gear Boxes
- ✓10–100 nos./shift (Monorail & Hoist)
- ✓Dry Type or Water Wash available
- ✓Lower cost than Downdraft
→ See Full Side Draft PageWater Wash Painting Booth
All paint types – pumpless designAutocoat’s top-selling pumpless design — no messy pumps, filters or nozzles. Water washing ensures complete pigment, resin and solvent separation.
- ✓Complete pigment, resin & solvent separation
- ✓Adequate exhaust removes all overspray
- ✓Reduced maintenance expenses
- ✓Works with all water-based & solvent paints
- ✓Eliminates fire risk & surrounding pollution
→ See Full Water Wash PageDry Back Painting Booth
Non-sticky paints – lowest costSuitable for all non-sticky overspray paints like Air Dry and Quick Drying PU — with Autocoat’s specialty multi-level metal baffle filtration at amazingly low running cost.
- ✓Multi-level metal baffle filtration
- ✓Amazingly low filter replacement cost
- ✓Meets CPCB Particulate Matter norms
- ✓No ETP required
- ✓Lower capital cost
→ See Full Dry Back Page Pumpless Design — Autocoat’s Top SellerAutocoat Engineering’s Spray Painting Booths are one of the top sellers of the no-pump painting booth design — eliminating messy pumps, filters and nozzles, considerably reducing maintenance expenses. Washing action ensures complete separation of pigment, resin and solvent, allowing only solvent to escape with exhaust air. Every quote includes a free AutoCAD drawing and room-plan review.
Painting Booth Types – Comparison
| Feature | Side Draft Booth | Water Wash Booth | Dry Back Booth |
|---|
| Paint Type | All types | All paint types | Non-sticky, Air Dry, PU |
| Filtration | Water Wash / Baffle | Pumpless Water Wash | Multi-Level Metal Baffle |
| Running Cost | Low | Low | Very Low |
| Maintenance | Periodic tank cleaning | Paint sludge disposal | Filter replacement only |
| Capital Cost | Moderate | Moderate | Lower |
| No ETP Required | Yes | Yes | Yes |
| Heavy Components | Yes (Monorail & Hoist) | Yes | Yes |
| Compliance | IS 3457 + Factories Act | IS 3457 + CPCB | IS 3457 + CPCB |
| Best For | Motors, valves, engines | All batch & conveyor | PU, air-dry, batch |
Painting Booth Projects
A selection of Autocoat Painting Booth installations across India:
Painting Booth
Painting Booth India
Indian Painting Booth
Spray Paint Booth
Lab Booth India
Conveyorised Painting Booth
Why Choose Autocoat for your Painting Booth?
Autocoat brings 35+ years of specialised painting booth manufacturing experience. Every unit is backed by the following guarantees:
📐
AutoCAD Engineered
Every project engineered from scratch — free room-plan review and AutoCAD drawing with every quotation.
🏭
100% In-House Manufactured
Full in-house manufacturing, assembly and live performance testing before dispatch — no outsourcing of critical components.
🔧
Site Commissioning
Trained engineers commission every booth on-site, including SOP/TPM laminations and detailed instruction manuals.
Painting Booth Applications
Autocoat Painting Booths are used across a wide range of industries and component types:
- Electric motors, pumps & valves
- Engines & gear boxes (with hoist)
- Automotive components & body parts
- Industrial machinery & fabrications
- Conveyorised production lines
- Batch painting for small components
- Furniture & wood products finishing
- Large structures & heavy equipment
Frequently Asked Questions
What is a Painting Booth? +
A Painting Booth is an enclosed, ventilated enclosure designed for spray painting components in a controlled environment. It ensures operator safety by exhausting harmful solvent fumes, reduces fire risk, meets pollution norms by filtering paint overspray, and improves the quality of the paint finish by preventing overspray from settling on freshly painted surfaces.
What types of Painting Booths does Autocoat manufacture? +
Autocoat manufactures three main types: Side Draft Painting Booth — for small to heavy components, optionally with monorail and hoist (10–100 nos./shift); Water Wash Painting Booth — pumpless design for all paint types with complete pigment/resin/solvent separation; and Dry Back Painting Booth — multi-level metal baffle filtration for non-sticky paints at the lowest running cost.
What is the price of a Painting Booth in India? +
Prices vary based on type, size, draft direction and room configuration. See our
Paint Booth Price page for indicative ranges, or contact Autocoat Engineering at
+91-7738638116 for a free customised quotation complete with AutoCAD drawing.
Who is the best Painting Booth manufacturer in India? +
Autocoat Engineering (India) Pvt Ltd, Thane, Maharashtra — India’s most experienced painting booth manufacturer since 1985. With 35+ years of expertise, every unit undergoes 100% in-house AutoCAD engineering, assembly and live trials before dispatch. Autocoat’s customers include ISO-certified OEMs with the most stringent quality requirements.
What is a pumpless Painting Booth? +
A pumpless Painting Booth — Autocoat’s top-selling design — eliminates the need for messy pumps, filters and nozzles. The water washing action separates pigment, resin and solvent efficiently, allowing only solvent vapour to escape with the exhaust air. This considerably reduces maintenance expenses while ensuring complete overspray capture and pollution compliance.
Why choose Autocoat for your Painting Booth? +
Autocoat brings 35+ years of specialised painting booth manufacturing experience. Key advantages: AutoCAD-engineered design for every project, 100% in-house manufacturing and performance testing before dispatch, site commissioning, detailed instruction manuals and SOP/TPM laminations, free room-plan review before quoting, and after-sale service with trained engineers. Every quotation includes an AutoCAD drawing at no cost.
